Exhibitor News

Exhibitor News

  • Hybrid motor starters for I/O-Link

    28 Feb 2018 Phoenix Contact Limited

    Phoenix Contact has added network-capable versions with I/O-Link interface to the Contactron hybrid motor starters product range

  • Force-guided coupling relay module

    28 Feb 2018 Phoenix Contact Limited

    Phoenix Contact's Rifline industrial relay system product range now includes a new force-guided coupling relay module with 24 V DC coil voltage.

  • Electronics housings for Raspberry Pi

    28 Feb 2018 Phoenix Contact Limited

    Phoenix Contact is introducing a new housing for Raspberry Pi minicomputers to the market. 

  • The entire range of ACM2n AC servo motors is now available from Motor Technology. This includes the full catalogue range of products previously offered, with exactly the same electrical and mechanical specifications, dimensions and options.

  • The M12 connectors for assembly from Phoenix Contact have now been equipped with push-in connection technology. 

  • Many cable crimping applications throughout the industry are conducted using manual ratchet tools or hand hydraulic tools. Depending on the number of operations conducted each day and the hand force required to close the handles of the tool, Repetitive Strain Injury (RSI) can result.

  • Yodel Lichfield Depot PLC update

    27 Feb 2018 MCS Control Systems Ltd

    Project Description:  A business critical  M340 PLC needed replacing at Yodel’s Lichfield Depot. The replacement was required urgently to ensure the Depot was running with the New PLC before the Christmas peak period.


  • Sidewall Printer Update

    27 Feb 2018 MCS Control Systems Ltd

    Project Description:  As part of an expansion programme, Huhtamaki needed increased production  at  their Gosport plant for producing food packaging.  A Sidewall Printing machine was a critical part of this expansion, and a suitable used machine was identified and purchased. However, as the machine was imported, the electrical, control, and safety systems of the machine needed reviewing and updating to meet the plant Health and Safety Standards.

  • Small drives for machines and equipment are typically powered up to 9.0 A, and are protected by conventional motor circuit breakers. However, when space in the enclosure is limited, it is very difficult to find room for significant numbers of protective components.

  • New Catalogue Coming Soon...

    22 Feb 2018 Eastern Transformers & Equipment Ltd

    Our 2018 electrical power products catalogue is due to be released next month and is bigger than ever!

    The catalogue covers our complete collection of transformers & wound components, power electronics, thermal management products, and accessories and is our most comprehensive to date at 132 pages.

    Our latest instalment has seen numerous products additions with many fresh ranges included. Look out for our new portable site transformers for heating, lighting, and general applications; custom-built transformers to 3.15MVA, and heating and cooling thermostats, to name just a few.

  • New Portable Site Transformer Range Out Now

    22 Feb 2018 Eastern Transformers & Equipment Ltd

    Our new portable site transformer range is out now featuring over 25 models available from stock from 3kVA to 30kVA continuously rated. The units within this series are suitable for a number of 110V applications including heating and lighting with 1 hour tool ratings from 4kVA to 35kVA. Input voltages are either 240V or 415V with 1ph, 2ph, and 3ph types. Various socket (up to 12) and cable gland (up to 4) options are available with all models designed and manufactured in the UK by ETE.

  • KEB's S6 Servo Drive Not just for servos

    21 Feb 2018 KEB (UK) Limited

    KEB's New S6 Drive not only offers the usual expected servo drive functionality but can drive a range of motor technologies, with and without feedback in speed, position oir torque control.

    The new safety card module provides upto 15 safety functions for drive and motor control using a Safety PLC and FSoE.

    With both drive and safety setup via software wizards on KEB's CombiVIS, reduced development time and increased functionality can be achieved by KEB customers.

  • KEB's New F6 drive still offers the ability to run various motor technologies, not just asynchronous but also  SMPM, IPM, High Torque, High Speed or synchronous reluctance motors but with new processors, selectable Real time fieldbuses and full FSoE it offers increased solutions to customers applications.

    With both the drive and FSoE set up available via a software Wizard coupled with the growing online librairies it enables development time to be reduced.

  • KEB's New Safety PLC & IO

    21 Feb 2018 KEB (UK) Limited

    KEB's New Safety PLC and IO range provide FSoE for a system.

    Set up using KEB's COMBIVIS Studio 6, where there is a software wizard to assist, it can be used in machine ultising EtherCAT.

    When used with KEB Drives and safety modules there are 15 safety functions available for the drive and motor control plus any number Safety IO's can be incorportated into the system.

    Thsi gives customer a cost effective, certiffied safety system that is flexaible and scalable for their growing appliaction demands

  • Ket-Bee 200X series

    19 Feb 2018 SD Products LTD

    Ketterer introduces a new series of angular gears onto the market with the Ket-Bee 200X series, available now from SD Products. High-performing mechanics within the smallest possible installation space, plus easy power transmission, an extended service life cycle and a positive price-performance ratio are the stand-out features of this new series.

  • Charter Controls at Drives and Controls 2018

    15 Feb 2018 Charter Controls

    With many new suppliers and even more products to show, we thought what better way to do that than at the UK's largest electrical engineering exhibition.

    We have two stands next to each other and representatives from our suppliers all over the world coming to talk about their products which will be on display.

  • The all new Economical ballscrew drive with integrated ball return channels, will be on display on our stand D500 at the Drives & Controls show. 

    The NEW type F has significant price advantages that have been made possible through the most efficient nut production and economical spindle production in the cold rolling process that’s not been seen before from Eichenberger Gewinde yet at the same time offering the highest performance you’d expect from a Swiss made ballscrew.

  • On display in the UK for the first time, these high performance EtherCAT®-based controllers and multi-axis drives enable the use of various motor types that can be conveniently integrated into a wide variety of high-end and demanding automation applications.

    PI will be exhibiting a range of products from the ACS portfolio, including the latest NanoPWM™ amplifiers – offering linear amplifier performance with the power, robustness and cost-effectiveness of a PWM drive – and the LCM laser control module, which allows laser source operation to be synchronised to motion profiles. Alongside, visitors will be able to see the SPiiPlusES drive node, which enables the addition of more capable motion control to existing EtherCAT automation solutions. Also on the stand will be the innovative motion control solution for laser scribing – a collaborative development between PI, ACS Motion Control and SCANLAB – combining a high speed laser galvanometer scanner with servo-driven stages to offer fast, flexible and precise laser machining, eliminating stitching errors and increasing throughput.

  • The need for traceability has never been higher. Gone are the days when it was driven and executed by the largest companies. These days, traceability demands are driven by industries and are driven down the supply chain, meaning relatively small companies are requested to comply

  • CAE solution specialist EPLAN will be showcasing the benefits of EPLAN Cogineer, their new configuration-based software package at the 2018 Drives and Controls show. The show takes place from 10th to 12th April, 2018 at Birmingham’s NEC. Visitors to the EPLAN stand D712 will also have the opportunity to meet with EPLAN partners, including Weidmüller and Festo.

  • Drives & Controls 2018 Stand No: D757 Interroll presents greater efficiency, greater power and new platform in drive solutions   Kettering, Northamptonshire, 26.01.2018. Interroll, the world’s leading ...
  • Control technology solutions from Siemens have been specified on a new range of cutting-edge coating machines forming part of a new market-leading modular production platform. The platform has been cr ...
  • Project Description: A business critical M340 PLC needed replacing at Yodel’s Lichfield Depot. The replacement was required urgently to ensure the Depot was running with the New PLC before the Christm ...
  • Project Description: As part of an expansion programme, Huhtamaki needed increased production at their Gosport plant for producing food packaging. A Sidewall Printing machine was a critical part of th ...